40oz UVDTF wrap

We have the full licence to print these designs in UV-DTF 

40oz UV-DTF wraps are sized to fit our 40oz quenchers they may fit others but we cannot guarantee the fit.

~UV-DTF in a printed using inks cured by a UV lamp
~They are printed onto a film that has a laminated top sheet
~They are permanent 
~They are waterproof (not dishwasher safe)
~Scratchproof once cured
~last 2-3 years and can add depth to your designs
~They are Quick and easy to use and are free from the need to be weeded. 

How to Apply:

1. Warm the wrap front and back, a gentle rub with a Squeegee is sufficient.

2. Trim the wrap to remove excess material, be careful not to cut the edge of the adhesive.

3. Ensure your glass/plastic is clean, use a lint free cloth, alcohol is not recommended.

4. Peel the design carrier film transfer off.

5. Take your time here, Position the design film onto the glass/plastic cup, you only get one chance to position as the adhesive is very strong and you will not be able to remove and reapply.

6. Rubbing the design with your squeegee or hands is the best method to adhere the film firmly to the substrate, work from the centre outwards, pushing out any bubbles as you go.

7. Carefully and slowly peel clear film off, if you find any parts lifting, reapply the film and squeegee again until it adheres to the glass/plastic.

8. Do not wash for 12 hours to let the design fix permanently, we do not advise to wash in the dishwasher.